I have a Brother DB2-B714-3 I'm in the middle of an urgent job for a client and jam/broke a needle. I loosened the hook screws to adjust the timing and the bobbin case holder (not the bobbin case) popped out and I can't get it to sit back into the hook casing.
Tech help please
Jul 14, 2006
2 Replies
Dear Gizmo,
I don't have a Brother, but my machine has a bobbin case similar. You must remove the needle plate to reinsert the bobbin case. Very easy, While you're at it, you can clean out the lint that accumulates in there after just one project....
Teri
You must have removed the Gib screws. It takes some fiddling to get it lined up correctly to just slide in. I just put it in the turn until it positions correctly. Replace the Gib and secure the 3 screws.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required