normally, when I run across vacuum pumps, I test them, repair them and offer them for sale via my web page but right now I'm drowning in stuff and don't have time to test this pump - it is a GAST rotary vane pump designed to be driven by a 1/4 HP 1750 RPM motor, I've put all the specs and info into the e-bay listing below. I've also set the starting price pretty low, but please only bid on it if you have the mechanical ability to put a pulley or coupler on it and connect it to a motor, and if you can install a service kit if it needs it - if you can do that then there is a good chance you will get an excellent price on a GAST pump. Note that I am not offering this through my web because I don't want to sell something through my web site that I haven't tested and know is good - this is untested.
This is a pressure pump, not a vacuum pump, but in my experience, either type will deliver adequate vacuum for wood turning use as a vac chuck, and the specs say 4CFM flow, which is plenty for our use.
here's the link
to contact me, do not reply to this message, instead correct this address and use it
will iam_ b_ No ble at msn daught com
*** Posted via a free Usenet account from