Oneway Laser Guided Hollowing System

Has anyone ever used the Oneway Laser Guided Hollowing System? If so, can you tell me how it works and how it compares to the Jamieson System? I am using a Oneway 2436 and have only hollowed with the Ellsworth tools. I want a laser guided system and am not sure which one to get.

Thanks, Ted

Reply to
Ted
Loading thread data ...

Ted - I don't have the Oneway, but I do have a shop built Jamison and the ELBO unit.

I use the Jamison like unit for deep boring ( over 7 -8 inches) and the Elbo for smaller stuff. The ELBO is easier to set up but chatters easier than the larger unit.

Hope this helps!! Hought

Reply to
hwahl

I had the same problem, which I "solved" by slightly tightening the joint bolts. The rig is a bit stiffer to use but most of the chatering was eliminated.

Reply to
Bradford Chaucer

I have a 2436 and use the Oneway hollowing system. It is a great tool easy to use and produces excellent results the first time out of th box....Jac

Reply to
Jack Riley

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.