Curling ribbing

Sue, I've never ever had ribbing curl, so I can't help! Sorry, Noreen

Try using the MC as 1/1 rib, then use the CC in alternate k/p. Or, switch to 2/2 rib and do 1k/1p|1p/1k around.

On Mon, 24 Oct 2005 23:34:41 +0100, "Sue W" spewed forth :

+++++++++++++

Reply to the list as I do not publish an email address to USENET. This practice has cut my spam by more than 95%. Of course, I did have to abandon a perfectly good email account...

I have trouble figuring out where the stranding goes on two-color ribbing. It always seems to me that it ought to make a double-stockinette fabric.

Is there some way to twine the yarns when you change colors?

The problem might be the difference in relative strength between two stitches and one stitch. Have you tried it in k2p2 to see whether the tension balances?

Of course, if it's wool, it might block out anyway.

=Tamar

Sue is this a natural or a synthetic thread ? Are you ussing the right needle size, when you `change`theads over the

2 stiches do you roll over or under the other colour ? it shouldn`t roll unless it is a very narrow strip ? what is it for ?

mirjam

Is one yarn thinner than the other?????? cheers....Cher

Thanks to all for the suggestions. In answer to the various questions raised, the yarn is 100% wool Noro Kureyon knitted on 5mm needles in the round. It's the ribbing for a sweater. I've stranded the yarn as in fairisle knitting keeping the MC below and the CC above, and kept the tension as loose as I could, so as not to pucker the fabric. It still makes quite a solid fabric without much stretch. The sleeves which I've already made didn't show up this problem since their small diameter doesn't give it much chance to flare out. It's possible that in use the rib would be okay since it will be up close against the body. Blocking may well help. I'm reluctant to pull it out having already done the sleeves. If you're interested in seeing pictures of the rib in question have a look at the WIPs album at

Sue,

I did a quick search for "corrugated ribbing" and came up with this website:

which has a little discussion in the comments on curling ribbing and different cast-ons you might want to try to help prevent it. I didn't have time to read the whole thing but a couple people mention that blocking will indeed fix the problem as well. I also didn't have time to check out the other links from the search so you might find more helpful stuff available as well.Good luck! Your sleeves are beautiful - I can't wait to see the finished project!

LauraJ

(PS I initially read your subject as "curling ribbon" and was wondering if you were trying to knit with it!)

Hi Laura, thanks for that link, it gives me hope that blocking will work. I used a cable cast on for this, I was trying to avoid estimating the length of tail to leave for a long tail cast on! If and when I get finished I'll post a picture.

As for trying to knit with curling ribbon, I think it would be a bit tough on the fingers and not very soft to wear ;-)