Need help with bead sizes

Wow, Val... that's quite an undertaking! I have a few loomed pieces lying around, but I'm pretty sure I used a size 12 bead when I made them. I'll check and if that would help you, I'll send you a jpg. Good luck with your new project! :)

Linda

11/0 and : 15/0 seed beads. I've gotten many requests for to incorporate other sizes, : such as 13/0 and 8/0. But those who ask haven't provided me with good info : to do so, and no beaders in my neck of the woods work in other sizes. With : so many helpful people here in rcb, I hope I can get some accurate : measurements to fill in the missing sizes. : : So, to anyone who does beadweaving (loom, peyote, brick, square stitches) in : any size other than Delicas and 11/0, I ask for measurement info. The : easiest way would be to send me a scan of a piece of work, a couple inches : in each direction, with a ruler in the picture and identify the type/size of : bead. The larger the bead size, the larger the sample should be to ensure I : can get a good count of beads (and fractional beads) to the inch. What I : hope to get is single bead dimensions out to the third or fourth decimal : place. : : You can email to the address below, remove the NOSPAM. : : Thanks : Val : snipped-for-privacy@NOSPAMbeadwizard.com : -- : Bringing you BeadWizard Design Software : : *************************** : Practice safe eating -- always use condiments. : *************************** : :

Linda, I look forward to getting your picture. All input helps me get it right, so you beaders can do your designing with confidence in the tool.

Val

You're welcome, Val. :) I'm off to Wisconsin for a few days, but when I get back I'll get it out to take pics and send to you. :)

Linda