I set it to scan at 300dpi which I thought was high enough. It always used to work at that level! Stupid technology!
Charlie.
I set it to scan at 300dpi which I thought was high enough. It always used to work at that level! Stupid technology!
Charlie.
Absolutely lovely, Charlie!!
What I do, is I lay the pendant flat, and put a lolly stick next to it which I put the loop on top of, butting it up to the pendant. I then solder it very very carefully. I'll take a pic if you can't figure it out tomorrow if you like.
Charlie.
Tool Magic is a brand name product for dipping handles of tools into. It puts a plastisized/rubbery coating on them. Check your local hardware store first.. .see if they carry something similar. Diana
My old scanner started doing something similar to that and, unfortunately, in my case, it meant that the scanner was basically dead. But no worries -- your new photographic wizzy scanner, etc., etc. will be so much better anyway! (P.S. Love the pendant!)
InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.