:

dongle

I have a Hus Designer1 embroidery machine and to access the software I need a parrarell port on my laptop which I do not have,I have tried usb adaptors but the software does not recognize them.I have been told by the company that all I can do is upgrade and+ $, which I am trying to avoid if I can.
Thank you in advance Mary.C
Reply to
Mary Cardakaris
Mary, I expect this is about as useless a response as you'll ever see. However - I 'have' seen this problem discussed here before and it can be done. You may have to wait until all the Easter eggs are dyed or you may be able to wander through old posts until you come upon it. There is hope. Polly
"Mary Cardakaris" wrote ...
Reply to
Polly Esther

This may be worth a try.
formatting link
,or.r_gc.r_pw.&fp=f26a11cf684416b
--
Ron Anderson A1 Sewing Machine
18 Dingman Rd Sand Lake, NY 12153
 Click to see the full signature
Reply to
Ron Anderson
formatting link
,or.r_gc.r_pw.&fp=f26a11cf684416b
Useful link Ron. In my case I had to find a USB-to-serial converter, and it took my three tries to finally find one which worked so I could hook up my computer to my Singer XL5000 and the PSW box. And every time I unplug the USB cable, I have to re-install the USB drivers. But it's worth it! :-)
--
Beverly
http://ickes.us/default.aspx
Reply to
BEI Design

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.