Good morning all, except for I.
Washing machine line ruptured, you know the rest. Very light rust color on lathe bed and table bed on planer. So far I have cleaned up the water then using a fine grade steel wool and some 3 in 1 oil rubbed down the surfaces, cleaned up with rag really well then spread small amount of same oil and wiped it in really well and cleaned well. Wanting to know if I attacked this the correct way. Does anyone have any input as to some other way to prevent the rust from becoming a future problem. It looks fine now and has been sitting for a while. When water first cleaned up it didn't take long for rust to appear on surface. It seems to be keeping it's original look except for some light discoloration.
Painted surfaces on the DVR 3000 are OK. Does anyone know if the underside (mounting legs) are a machined surface. If so I will have to dismount and clean as well. Trying to avoid, I'm alone and it's heavy.
Wondering about the Jet planer as well, I've gotten the obvious. Anyone know of hidden places that would be suspectable. Thanks in advance to any and all replies. Richard O'