I like to introduce my new website to this group. I've learned a lot about woodturning in this group, so what you see at my website wouldn't be there without RCW! I hope you will enjoy the works.
Thanks. As nearly as I can tell, I don't speak a word of Dutch ... but even in English, I hope you're aware that my post was meant only as a light-hearted tease. I've made exactly the same mistake numerous times. And I usually got teased for it.
I took your post as you meant it, and am really amused by the reactions and my own mistake. I live in The Netherlands, it's 10:15 am here. I do speak some words of English, but still working on improvement, so any input will help.
Do you know Remco personally? I know a guy by that name who moved from the Netherlands to Nova Scotia. He is, if I recall properly, a newly married chiropractor.
By the way ... would your 'some words of English' extend to discussing how you photographed your work?
The work itself is good. Very good, even. I especially like the Astral-light, the Free-light and the Umm.
But what caught my eye the most is the photography.
I do not know Remco in Nova Scotia, is he a woodturner too? Does he have a website?
Yes, I'll wake up the words;-): I put my work on a shooting table, which has a transparent matte acrylic top. This is lighted from the underside. I use 2 softboxes, 1 left and 1 right to the front of the object. For smaller objects with narrow openings I use a spotlight to put some light into the object and the light is then reflected by a piece of paper or aluminium foil. I also make use of a polarising filter to handle unwanted reflections. After taking the pictures, some Photo Shop work is done too: adjusting brightness, contrast, colour, background, and so on and making it web- ready. That's all. O.K. it' s a lot of work, but I like to do it that way.
The Umm is 2 wo piece turning, like a cup and saucer.
Very nice indeed Gerard. I really like the names! The woodwork, site and photography are top notch. What software are you using for the images? I really like the thumbnail to zoom feature on the same page.
Thank you Prometeus. The Maria piece was some turning and a lot of routing (is that called routing or drilling when using a small burr in a dremel tool free hand?) and sanding making it look like a 3 piece object. I like the piece a lot, that's why it's also under the logo on every page.
I usually call that carving. Power carving, if you like. Another tool for that that works great is a regular 90* die grinder. You can buy a quick-change mandrel for them, and use that to mount sanding discs that are about 1.5" in diameter (3.81cm, give or take) that screw on and off very quickly. While that won't give you a finished surface, it is excellent for removing stock quickly in a controlled way. (The chance of tearout is really reduced, because you are abrading the wood, not shearing it.)
InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.