Ott Lamps

Do you all know if you can put a TrueColor lightbub in a regular lamp, or does it have to go in an OttLite?

Thanks, LG

Reply to
lizard-gumbo
Loading thread data ...

If it fits in the fixture, it will work.

Caveat: An Ott TruColor bulb is a fluorescent bulb. Do not put it in a lamp with a dimmer circuit. Fluorescent bulbs don't run very well on dimmer circuits, and it won't last as long as it would normally.

-- Jenn Ridley : snipped-for-privacy@chartermi.net WIP: Water Lilies, Rose Trio, Be Mine, Emperor's Coat II, Carousel Most recently Finished: Romance, Halloween Circle, Always be a Wildflower Stitching log:

formatting link

Reply to
Jenn Ridley

Yes, you sure can. I have a lamp that takes the bulbs similar to the OTT bulbs, and was able to switch to the OTT bulb. Of course, I discovered this *after* I bought an OTT light. But, to be honest, I don't see much difference, I would not spend the money on an OTT bulb again, and would just go with the regular 13 watt bulb or whatever it is.

..Linda

Reply to
Linda D.

I'm lost (sorry). You don't see much difference between what and what? And the regular 13-watt Ott bulb? as opposed to what?

Reply to
lizard-gumbo

formatting link
has Verilux bulbs which will fit into a regular lamp.

Reply to
Karen C - California

I bought a Phillips true light today at Walmart for a regular lamp for under $4. I brought it home and compared it with my off in terms of color range and it is pretty close.

Reply to
bdiane

Sorry if I was confusing you... The lamp I have takes either a Philips 13 watt compact fluorescent bulb *or* the 13 watt OTT bulb. I spent money on the OTT bulb at Michael's (thank goodness for the 40% off coupon) because I had heard how wonderful the light they gave off was. But, I have found I actually prefer the Philips bulb. I feel it gives off more light and a clearer light. The OTT bulb seems like a softer light to me.

Maybe it's just 'me' because lots of needleworkers and quilters thing the OTT bulbs/lamps are the best thing since sliced bread.

...Linda

Reply to
Linda D.

Well, thinking this was a great idea to test, I got a Philips "Natural Light Plus" bub (60 watts) and used it in my newly designated stitching lamp. Didn't really care for it much and put my 100-watt incandescent back in.

The natural bub cast shadows from the beads that hang from my lamp (it's a Victorian-type thingie) all over my work and the wattage just didn't seem enough.

So I guess I'll just stick with the good ol' incandescents, but THANK YOU for saving me $35 to figure this out.

LG

Reply to
lizard-gumbo

Reply to
Brenda Lewis

I hadn't really given that much thought; I just figured I could put a bub in an existing fixture. In any case, I think I'll put one on my wish list.

Thanks.

LG

Reply to
lizard-gumbo

I have tried both the Ott 18-watt and 13-watt bulbs. The 18-watt has a much stronger light that the 13 watt, but the bult is much longer (a good 8") and probably can't fit into anything but the specialized fixture.

My prefered light is actually from Affordable Products - it holds a regular circular flourecent (sp) bulb and has a 5" magnifier built >

Reply to
fran

InspirePoint website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.