Display Shelving

=====================================================

I have made a simple design that folds up and takes up little room.

Take 4 2X4X8's; Hinge two each together. Spread the bottom to your desired width. Drill matching holes in the bottom ends and thread some nylon line through them, so they won't spread any more.

Next, take 2X4 stock and cut 8 pieces 14-1/2" long. Attache these to the uprights at 1', 3', 5', and 7' so that there is 7-1/2" between uprights. You now have one half of the support section of your shelving.

Make another one.

All you have to do is add 1X8's, as long as you want your shelving (Max

If you want a drawing, Let me know here.

The Other Bruce ====================================================================

Bruce,

Thanks for the reply. If you have a drawing already made up that would help but if not i will figure it out.

Thanks again, Dave

Email me at MH>>> snipped-for-privacy@hotmail.com (Remove >>>) and I'll send you my "Rough" drawing.

Bruce