Help please for lathe part

"steve" wrote: (clip)I was wondering if anyone knows where I could = find a replacement wheel or have the specs so I can have one made. = (clip) ^^^^^^^^^^^^^^^^^^^ I am guessing it is cast iron. It should be possible to braze it.

broke the handwheel. From the research I have been able to do, it appears to be this 1935-36 model. The only difference is mine says 9" next to the Craftsman logo.

Steve, you can buy these wheels separately from some stores. I have one purchased from Busy Bee. It coat around $10 at the time. They come with different size holes in the middle. I'm not familiar with your lathe but perhaps that could be a way out.

Mike

If you are not familiar with Old Woodworking Machines web site, check out: You may find someone there with a parts lathe or a spare wheel.

In a fit of stupidity I dropped the tailstock of my 9" craftsman lathe = and broke the handwheel. From the research I have been able to do, it = appears to be this 1935-36 model. The only difference is mine says 9" = next to the Craftsman logo.

= [IMG]

Thanks,

Steve