Nice load of logs this weekend

May 23, 2005 16 Replies

(pics in ABPW if interested) We took our 2nd trip into Sequoia National forest this weekend..



Improvements this trip, learned from 1st adventure:



Bought a really cute Stihl 14" chain saw... we beat ourselves to death last weekend with bow saws..



Filled the gas tank in the truck in town for $1.45 a gallon, as opposed to the gun & mask prices up in the mountains..



Left the maps in the glove box and used the laptop with the GPS program..



We left at about 8 am, back at about 2 ph, including about an hour drive each way.. there was about 100 times as much fallen wood as we could possibly harvest, but while most folks were going for firewood, we were kind of picky.. Mainly looking for turning blanks and type of wood that I haven't used yet..



Brought back about 1/4 cord, I guess... found 2 interesting trees, a sequoia and a ponderosa pine... brought back sections ranging from 9" to 14"....



Can't wait to go back again!!



(I'm a lumberjack, and I'm ok???)


mac



Please remove splinters before emailing


These are present California gas prices?

(clip) Sequoia National forest this weekend.. (clip)

(clip) Filled the gas tank in the truck in town for $1.45 a gallon, as opposed to the gun & mask prices up in the mountains.. (clip)

$1.45 a gallon? Were you the onte with the mask and gun? Here on the cheap coast it just dropped under $2 per gallon Joe

You are putting premium (high octane) in your saw, aren't you??? robo hippy

opps.. my mistake.. a typo.. should have been 2.45...

it was $2.80 a gallon last month... that's for "regular" unleaded..

mac

Please remove splinters before emailing

sorry, my typo/price shock.. supposed to be $2.45 a gallon... probably worth about $1.00 a gallon..

mac

Please remove splinters before emailing

we're using the "middle" one.. 89 octane... that's what the guy at the saw shop told us to use.. also using the little containers of oil, made to mix with a gallon of gas for the proper 50:1 mix... 2 stroke has come a long way since I last had one!

mac

Please remove splinters before emailing

Up here we mix 30:1 in blackfly season....

Regular is still about $3US a US gallon in my part of BC. OUCH!

Tom

Mac, All of the loggers that I have talked to (there are a lot of them here in Oregon), the saw shop where I bought my Husky, and the factory rep from Sthil who did a chainsaw safety demo for our club said to use premion grade gas. Gas degrades fairly quickly, and if you don't use is up within a month, and don't use a stabilizer, it is bad for your saw. If it has been since last summer, the gas should be thrown out. robo hippy

Great bug control. Does it do any harm to the saw?

Wow.. that's what the "rip off" price was at the "country store" we stopped at a few weeks ago.. $2.999

mac

Please remove splinters before emailing

hell, you'd go to jail for that in smoggy Calif... damn chain saw even has a catalytic converter and meets "CARB" requirements..

mac

Please remove splinters before emailing

Good point, thanks... I'll definitely keep that in mind..

One of the reasons that I paid a few cents extra to get the 2 cycle oil in the "gallon mix" size is that we have a tiny tank on the chain saw and I don't want to pre-mix more than a gallon at a time.. If I have any left in the can at the end of our trips to the woods, I'll pass it on to a neighbor with a weed eater..

If the chain saw is like either of our trucks, it would run a lot better on your gas than on the crap that they call gas in Calif..

mac

Please remove splinters before emailing

Doesn't help the plug, but it beats bathing in bug dope.

You're both lucky. Here in the middle, it's still hovering around $2.30

you might have missed my apology for the type... I meant to type $2.45 but I guess I was in sticker shock.. *g*

mac

Please remove splinters before emailing

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required